CSFB vs. SRVCC, or how to “sudo make me Voice over LTE” – take 2

9 Sep

continuing the CSFB vs. SRVCC, or how to “sudo make me Voice over LTE” – take 1

I was thinking the other day and I realized that CSFB is meant to be used only if VoLTE cannot be used for some reason. That sounded strange to me as in order to be able to use CSCF you need the special combined EPS/IMSI attach but in some cases you may find yourself unable to use VoLTE after you attach. On example of such case is when the network prefers VoLTE and the UE is able to do VoLTE but IMS voice is not available (for example the registration to the IMS network fails).  To find the answer to my questions I turned to TS 23.221, maybe it can help in some way.

What I found is than an UE can be either voice centric or data centric. This usage setting basically tells the network what’s more important for that UE (voice or data). For example a voice centric UE will disconnect from E-UTRAN and try GERAN/UTRAN if it is not able to obtain voice service in E-UTRAN while a data centric UE will not do that.

Now, there’s another setting on the UE which is called voice domain preference and has one of four values CS Voice only, IMS PS Voice only, CS voice preferred, IMS PS Voice as secondary, IMS PS voice preferred, CS Voice as secondary.  Based on these 2 settings and what happens in the network the UE will prefer one of the following 4 states:

 

Voice centric UE

Data centric UE

CS Voice preferred/ CS Voice only

CS/PS mode 1

CS/PS mode 2

IMS PS Voice preferred/ IMS PS Voice only

PS mode 1

PS mode 2

* an IMS PS Voice preferred UE may still be connected to both systems.

* an IMS PS Voice Only UE will not use combined attach or CSFB

*TS 23.221 Annex A gives guidance on how a CS and IMS capable UE should behave.

On the other hand, the network has its settings and preferences too. When an UE attempts to do a combined attach, the network may inform the UE of its settings, like CS Fallback not preferred, SMS-only (the CS network is to be used to SMS over SGs only, not for CSFB) or IMS voice not available. The UE may transition between these states if its settings or the network’s settings change. Also an UE in a PS mode state will transition to the corresponding CS/PS mode state if IMS is unavailable for some reason.

Now, in order to do CSFB or SMS over SGs one needs to be in one of the CS/PS modes. To be in one of these modes the UE needs to do a combined EPS/IMSI attach. Now let’s say our UE is set to prefer the IMS for voice calls but its registration to the IMS network fails for some reason or the network indicates to the UE it does not support PS voice. In this case the UE is already connected to the EPS network but most likely not to the CS network and in order to use CSFB it needs to transition to a combined EPS/IMSI attach situation. To do this the UE will do a Combined TA/LA Update Procedure (TS 23.272 section 5.4.1).

Later edit:

Relevant specs for the UICC side:

TS 24.008 – Layer 3 specifications, Core network protocols

TS 31.102 – USIM Applications

Why? : Because I would like to see in more detail how this entire CSFB/SRVCC story happens at the UE+UICC(SIM) level.

Source: http://windancersth.wordpress.com/2013/09/07/csfb-vs-srvcc-or-how-to-sudo-make-me-voice-over-lte-take-2/

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: