Before looking into packet level QoS detail when WMM disabled/ or Non WMM client traffic goes in WMM enabled wireless network we will see how QoS configurations will be done on WLC.
There are 4 QoS profiles(Platinum, Gold, Silver & Bronze) available in Cisco WLC platforms. If you go to “Wireless -> QoS -> Profiles” you can see these profiles.
If you click on each profile category, you can configure the parameters specific to that profile(Disable the radio network 802.11 a/n or b/g/n prior to do this & enable it once you are done). In below I have shown Platinum QoS profile configs. In this case per user bandwidth values leave as default ( which is Cisco’s best practice). Average Data rate & Average Burst rate is to control TCP traffic per user. Average Real-time rate & Burst Real-time rate is to control UDP traffic per user. A value of…
View original post 403 more words